Traxxas Rustler 4x4 VXL 1/10 RC Truck
Tamiya Wild Willy 2 1/10 Rc Kit
The Wild Willy 2 is a reproduction of the popular original Wild Willy from the mid 80s. The new Wild Willy has an all new chassis and larger tires allowing it to tread over rough terrain. Of course, the Wild Willys trade mark is the animated wheelie capability thanks to an all new wheelie bar.
The WR-02 chassis features a heavy duty monocoque which has side frames to increase rigidity. R/C unit, motor, and battery pack are positioned along the centerline of the chassis and the motor's power is delivered to the rear wheels via a fully-enclosed gearbox equipped with a differential. A wheelie bar is fitted to enable exciting, wheels in the air driving action. 4-wheel double wishbone suspension and 2-piece steering tie-rod offer smooth steering response. Tires/wheels and the gearbox/motor come pre-assembled for ease of assembly.
Gmade Sawback 4LS 1/10 RC Kit
The Gmade Sawback 4LS combines 4-link suspension, 1.9" tires and wheels, and 93mm XD Aeration shocks to deliver a dramatic performance upgrade. By getting rid of the leaf springs and small 1.5" tires that are found on the standard Sawback, the 4LS offers reduced torque twist, increased suspension articulation and improved ground clearance. Additionally, the Sawback 4LS body has been finished off with a tube front bumper, grille, roll bar and detailed interior components to elevate the appearance of this awesome scale rig.
Gmade NR01 beadlock wheels are combined with MT 1903 super soft compound 1.9" tires to keep the rig rolling. An adjustable battery tray allows you to fit a variety of different battery types, and the highly detailed, dust proof receiver box will keep your electronics safe and concealed when the going gets rough. Combine this with aluminum steering rods, solid spool type 32 tooth front and rear locked differentials, metal gear covers and one piece graphite axle housings, and you have a recipe for unmatched scale adventure. Add your electronics to this incredible package and you are ready for the rocks!
NOTE: Painted body shown in photos is for illustrative purposes only. Included body requires assembly, is clear and requires paint. See needed to complete list below for a full list of items required to complete the model.
Tamiya Metal Dump RC Kit
Rc Metal Dump Truck
Dump trucks earn their living in some of the toughest workplaces around: large-scale construction sites, mines and quarries to name but a few. This R/C model assembly kit has a unique and exciting color scheme: rather than the yellow typical of such construction vehicles, it is black-based with numerous chrome-plated parts. The cab and rear bed are molded in black, and metallic stickers are provided to depict logos and markings including stud and chain motifs, to give the model some real attitude. Chassis monocoque, front bumper, rear support bar with roller and wheels are all chrome-plated. Spike tires round off the look.
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. It utilizes a 'square' setup with similar tread and wheelbase lengths. Sealed gearbox is integrated into the frame and protects from dust and debris, while the built-in front and rear differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension and friction dampers plus a 2-piece tie rod steering setup with the servo on the left for excellent response. Furthermore, it has chrome-plated wheels to match the chassis, fitted with big 115mm diameter soft compound lug pattern spike tires, plus a rear support bar with roller to prevent the model from flipping.
• 1/24 scale 4WD R/C model assembly kit.
• Cab and rear bed are injection-molded in black plastic.
• Alternate rear bed between flat and raised positions by changing the position of the two stays and snap pins in the body mounts. Note: It is not advised to put objects in the rear bed, or drive the model with it raised.
• Metal-plated wheels.
• Tire Width/Diameter: 68mm/115mm
• The 4WD GF-01 chassis monocoque and (stays, bumper, wheelie bar, etc.) are metal-plated.
• The sealed gearbox is integrated into the frame, while the built-in differential gears provide smooth cornering.
• 4-wheel double wishbone suspension with friction dampers.
• The 'square' setup chassis uses similar tread (194mm) and wheelbase (174mm) lengths.
• Torque-tuned motor included.
• Monocoque Frame
• Gear-Driven 4WD
• Gear Ratio = 18.03:1
• Includes: Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
• Requires: 2-channel radio, steering servo, and 7.2volt battery with compatible charger.
Traxxas Maxx Rc RTR Truck
The Traxxas X-Maxx forever changed the face of RC monster trucks. Its radical new design, massive size, brutal strength, and unmatched power transformed X-Maxx into the stuff of legends. There is really nothing else like it… until now. Meet the all-new 1/10 Traxxas Maxx. Maxx expertly packages X-Maxx’s innovative design elements into a lighter, more compact, more ferocious beast that is ready to take speed and strength to new levels extreme intensity. Let the fun begin!
MODEL 89076-4: Maxx: 1/10 Scale Monster Truck. Ready-To-Race® with TQi™ 2.4GHz radio system with Traxxas Stability Management™, Self-Righting, and VXL-4s ESC